Photo 1

High pressure oil seal 35x46x4,9 (34,5x46,2x4,7) 633B0363 OMP 32 HPS

Code48001174
In stock23pcs
Priceexcl. VATFrom €66.63/pcs
High pressure oil seal 35x46x4,9 (34,5x46,2x4,7) 633B0363 OMP 32 HPS—
€66.63excl. VAT

Technical data

Properties
Seal type633B0363
Material typeNBR
BrandDanfoss
Weight6g
Rotary seal dimension
Shaft Diameter35mm
Housing diameter46mm
Width 14,9mm

Description

The Danfoss 633B0363 high-pressure oil seal, measuring 35 × 46 × 4,9 mm, is a shaft seal used, among others, in Danfoss orbital motors (OMP/OMR). Made of NBR elastomer, it is designed to work under increased pressure. Our range includes: original Danfoss seals complete Danfoss repair kits DMHUI brand replacements Technical parameters: Inner diameter (d): 35,0 mm Outer diameter (D): 46,0 mm Height (H): 4,9 mm Material: NBR (nitrile rubber) Manufacturer code: 633B0363 Application: Danfoss OMP / OMR orbital motors The oil seal provides effective shaft sealing, prevents oil leaks and protects against contamination. It performs well in mobile and industrial hydraulics.

Material

NBR (nitrile butadiene rubber)

  • Operating temperature-30 °C to +100 °C

Good with oils, fuels, water and compressed air. Not for brake fluid, solvents, strong acids or sunlight.

Chemical resistance
Can be usedDo not use
Mineral oil, grease and hydraulic oil (H, H-L, H-LP)Brake fluid (DOT 3, DOT 4, DOT 5.1): the ring swells quickly
Diesel, fuel oil, keroseneSunlight and open air (ozone): the rubber cracks
Petrol (gasoline), propane, butaneAcetone, MEK, ethyl acetate and similar solvents
Water and water-based liquids, up to +80 °CBenzene, toluene, trichloroethylene (aromatic and chlorinated solvents)
Compressed air, also with oil mistSynthetic ester oils and fire-resistant fluid HFD-R
Water-based fire-resistant hydraulic fluids (HFA, HFB, HFC)Strong (concentrated) acids, e.g. nitric and sulfuric, and strong oxidizers
Oil-and-water emulsionsSteam and hot water above +100 °C
Weak acids, alkalis and salt solutions, at room temperature
Use with cautionPetrol with a lot of bioethanol (E10, E85): better use FKM (Viton)

Shows low compression set within the recommended temperature range.

We recommend: Industrial chemicals

View all

We recommend: Tools

View all