High pressure oil seal 60x80x7 NS01W NBR
| Code | WT06333 | |
|---|---|---|
| In stock | 669 | pcs |
| Priceexcl. VAT | From €8.39 | /pcs |
Price by quantityexcl. VAT
Similar
StockCode
Technical data
| Seal type | NS01W | |
|---|---|---|
| Material type | NBR | |
| Brand | WINTEK | |
| Weight | 27 | g |
| Shaft Diameter | 60 | mm |
|---|---|---|
| Housing diameter | 80 | mm |
| Width 1 | 7 | mm |
Description
The 60x80x7 NS01W (BAHD) NBR high-pressure oil seal is intended for use in hydraulic motors and hydrokinetic drive systems. Thanks to its design with an open metal insert on the front face, the seal remains stable under high pressure. Made of nitrile rubber (NBR), resistant to oils and greases. The NS01W model corresponds to the BAHD standard and can be used interchangeably with BAHDSN and BAKHDSN. Technical data: Inner diameter: 60 mm (2.36 inch) Outer diameter: 80 mm (3.15 inch) Seal height: 7 mm (0.28 inch) Material: NBR Maximum working pressure: 150 bar Average working pressure: 100 bar Maximum linear speed: 2 m/s
Material
NBR (nitrile butadiene rubber)
- Operating temperature-30 °C to +100 °C
Good with oils, fuels, water and compressed air. Not for brake fluid, solvents, strong acids or sunlight.
| Can be used | Do not use |
|---|---|
| Mineral oil, grease and hydraulic oil (H, H-L, H-LP) | Brake fluid (DOT 3, DOT 4, DOT 5.1): the ring swells quickly |
| Diesel, fuel oil, kerosene | Sunlight and open air (ozone): the rubber cracks |
| Petrol (gasoline), propane, butane | Acetone, MEK, ethyl acetate and similar solvents |
| Water and water-based liquids, up to +80 °C | Benzene, toluene, trichloroethylene (aromatic and chlorinated solvents) |
| Compressed air, also with oil mist | Synthetic ester oils and fire-resistant fluid HFD-R |
| Water-based fire-resistant hydraulic fluids (HFA, HFB, HFC) | Strong (concentrated) acids, e.g. nitric and sulfuric, and strong oxidizers |
| Oil-and-water emulsions | Steam and hot water above +100 °C |
| Weak acids, alkalis and salt solutions, at room temperature | |
| Use with cautionPetrol with a lot of bioethanol (E10, E85): better use FKM (Viton) | |
Shows low compression set within the recommended temperature range.
We recommend: Industrial chemicals
View all
Multi-Spray WEICON W 44 T 500 ml- Code
- 10039121
- In stock
- 104pcs
- Price excl. VAT
- €6.81/ pcs
WEICONLOCK AN 305-77 thread locking agent 50 ml [30577150-51]- Code
- 10043760
- In stock
- 13pcs
- Price excl. VAT
- €18.54/ pcs
WEICON AL-T Allround Lubricant High temperature grease 400g [26600040-51]- Code
- 10046476
- In stock
- 10pcs
- Price excl. VAT
- €9.88/ pcs
Gasket Maker flexible special sealant [30101310-51]- Code
- 10052667
- In stock
- 32pcs
- Price excl. VAT
- €15.47/ pcs
WEICON O-Ring Bonding Set [12508030]- Code
- 10034766
- In stock
- 3pcs
- Price excl. VAT
- €35.94/ pcs
WEICON Allround Sealing Spray 400 ml- Code
- 10052517
- In stock
- 11pcs
- Price excl. VAT
- €12.40/ pcs
WEICON Rust Converter 400 ml- Code
- 10049153
- In stock
- 9pcs
- Price excl. VAT
- €11.89/ pcs
Weicon Silicone grease 85g- Code
- 10050566
- In stock
- 19pcs
- Price excl. VAT
- €15.99/ pcs
We recommend: Tools
View all
Seal clasper- Code
- 48003739
- In stock
- 15pcs
- Price excl. VAT
- €195.96/ pcs
WEICON 4-piece spray head set with valve for WSD400- Code
- 10009303
- In stock
- 21pcs
- Price excl. VAT
- €4.37/ pcs
Inner groove caliper- Code
- 48003254
- In stock
- 1pcs
- Price excl. VAT
- €136.70/ pcs
Seal stretcher [o40MM-250MM]- Code
- 48003371
- In stock
- 3pcs
- Price excl. VAT
- €272.19/ pcs
%5D-4.jpg)
Piston Seal Constrictor [CALIBRATING TOOL FOR E/GR(800)]- Code
- 48003370
- In stock
- 2pcs
- Price excl. VAT
- €20.85/ pcs
Deep seal twistor set- Code
- 48003373
- In stock
- On request
- Price excl. VAT
- On request
ULTRASHARP 4.0- Code
- 48003255
- In stock
- 3pcs
- Price excl. VAT
- €88.50/ pcs
-0.jpg)
Spare blades for ULTRASHARP scissors (10 pcs.)- Code
- 48004796
- In stock
- 6pcs
- Price excl. VAT
- €15.99/ pcs