Photo 1

Oil seal 33x46x4 HLPS NBR

Code48010709
AvailabilityOn request
Oil seal 33x46x4 HLPS NBR—
PLN 119.18excl. VAT

Technical data

Properties
Seal typeHLPS
Material typeNBR
BrandOEM
Weight6g
Rotary seal dimension
Shaft Diameter33mm
Housing diameter46mm
Width 14mm

Description

The 33x46x4 HLPS NBR shaft seal is a product available in our online store lemming.shop. It is a high-pressure simmering, which is used in hydraulic engines. These engines are often used in hydrokinetic drives, where the reliability and durability of the seal are key. The shaft seal is characterized by an open metal insert on the front side. This creates a stable contact surface that protects against deformation under pressure. In addition, the Teflon insert supports the sealing lip, which increases the efficiency of the seal. The product is made of NBR, or nitrile rubber. This is a material with high resistance to oils and greases, making it ideal for use in hydraulic engines. The PTFE40BR insert further increases the durability and reliability of the seal. The technical data of the 33x46x4 HLPS NBR shaft seal are: - Maximum working pressure: 200 bar - Average working pressure: 150 bar - Maximum linear speed: 1.5 m/s Purchasing the 33x46x4 HLPS NBR shaft seal is an investment in the durability and reliability of your hydraulic engine. We invite you to shop in our online store lemming.shop.

Material

NBR (nitrile butadiene rubber)

  • Operating temperature-30 °C to +100 °C

Good with oils, fuels, water and compressed air. Not for brake fluid, solvents, strong acids or sunlight.

Chemical resistance
Can be usedDo not use
Mineral oil, grease and hydraulic oil (H, H-L, H-LP)Brake fluid (DOT 3, DOT 4, DOT 5.1): the ring swells quickly
Diesel, fuel oil, keroseneSunlight and open air (ozone): the rubber cracks
Petrol (gasoline), propane, butaneAcetone, MEK, ethyl acetate and similar solvents
Water and water-based liquids, up to +80 °CBenzene, toluene, trichloroethylene (aromatic and chlorinated solvents)
Compressed air, also with oil mistSynthetic ester oils and fire-resistant fluid HFD-R
Water-based fire-resistant hydraulic fluids (HFA, HFB, HFC)Strong (concentrated) acids, e.g. nitric and sulfuric, and strong oxidizers
Oil-and-water emulsionsSteam and hot water above +100 °C
Weak acids, alkalis and salt solutions, at room temperature
Use with cautionPetrol with a lot of bioethanol (E10, E85): better use FKM (Viton)

Shows low compression set within the recommended temperature range.

We recommend: Industrial chemicals

View all

We recommend: Tools

View all