Photo 1

Oil seal 41,27x53,98x5 HLPS NBR

Code48010710
In stock8pcs
Priceexcl. VATFrom €27.22/pcs
Oil seal 41,27x53,98x5 HLPS NBR—
€27.22excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeHLPS
Material typeNBR
BrandOEM
Weight9g
Rotary seal dimension
Shaft Diameter41,27mm
Housing diameter53,98mm
Width 15mm

Description

The 41.27x53.98x5 HLPS NBR shaft seal is a product that finds application in hydraulic engines, often used in hydrokinetic drives. Its construction includes an open metal insert on the front side, which provides a stable contact surface, protecting against deformation under pressure. Additionally, a Teflon insert supports the sealing lip, which translates into the effectiveness of the product's operation. The shaft seal is made of NBR, or nitrile rubber, known for its good resistance to oils and fuels. The PTFE40BR insert further increases the product's durability. The technical data of the seal includes a maximum working pressure of 200 bar, an average working pressure of 150 bar, and a maximum linear speed of 1.5 m/s. This product is designed to work in difficult conditions, where high reliability and durability of the seal are required. We invite you to purchase the 41.27x53.98x5 HLPS NBR shaft seal in our online store. We guarantee quick order processing and professional service.

Material

NBR (nitrile butadiene rubber)

  • Operating temperature-30 °C to +100 °C

Good with oils, fuels, water and compressed air. Not for brake fluid, solvents, strong acids or sunlight.

Chemical resistance
Can be usedDo not use
Mineral oil, grease and hydraulic oil (H, H-L, H-LP)Brake fluid (DOT 3, DOT 4, DOT 5.1): the ring swells quickly
Diesel, fuel oil, keroseneSunlight and open air (ozone): the rubber cracks
Petrol (gasoline), propane, butaneAcetone, MEK, ethyl acetate and similar solvents
Water and water-based liquids, up to +80 °CBenzene, toluene, trichloroethylene (aromatic and chlorinated solvents)
Compressed air, also with oil mistSynthetic ester oils and fire-resistant fluid HFD-R
Water-based fire-resistant hydraulic fluids (HFA, HFB, HFC)Strong (concentrated) acids, e.g. nitric and sulfuric, and strong oxidizers
Oil-and-water emulsionsSteam and hot water above +100 °C
Weak acids, alkalis and salt solutions, at room temperature
Use with cautionPetrol with a lot of bioethanol (E10, E85): better use FKM (Viton)

Shows low compression set within the recommended temperature range.

We recommend: Industrial chemicals

View all

We recommend: Tools

View all