Photo 1

Pressure oil seal 150x180x8/8,5 BABSL FPM

Code109513V
In stock44pcs
Priceexcl. VATFrom €25.29/pcs
Pressure oil seal 150x180x8/8,5 BABSL FPM—
€25.29excl. VAT

Technical data

Properties
Seal typeBABSL
Material typeFPM
PressureP < 10bar
BrandSOG
Weight200g
Rotary seal dimension
Shaft Diameter150mm
Housing diameter180mm
Width 18mm
Width 28,5mm

Description

The BABSL FPM pressure seal, measuring 150 × 180 × 8 / 8,5 mm (inner dia. × outer dia. × height/lip), made by SOG (Taiwan), code: 109513V. This seal is designed for operation under pressure (up to approx. 10 bar) with an additional protective lip. The design is based on a reinforced casing and FPM (Viton) rubber material resistant to high temperatures and aggressive media, with an additional dust lip. Technical features: Inner diameter (d): 150 mm Outer diameter (D): 180 mm Height / lip: 8 mm / 8,5 mm Type: BABSL (pressure, with protective lip) Seal material: FPM / Viton (fluoroelastomer) Purpose: hydraulic applications, rotary machinery Working pressure: up to approx. 10 bar Design: double-lip seal with additional protection This seal protects against oil leakage under pressure and protects the interior from contamination thanks to its additional lip design.

Material

FPM / FKM (fluoroelastomer, Viton®)

  • Operating temperature-20 °C to +200 °C

Good for high temperature, all fuels and oils, ozone and sunlight. Not for brake fluid, acetone-type solvents, ammonia, hot steam or severe cold.

Chemical resistance
Can be usedDo not use
High temperatures, continuously up to +200 °CAcetone, MEK, dioxane, ethyl acetate and similar solvents
Mineral and synthetic oils, incl. engine oil and oils with aggressive additivesBrake fluid (DOT 3, DOT 4, DOT 5.1): the ring swells
Benzene, toluene, xylene, trichloroethylene (aromatic and chlorinated solvents)Ammonia, amines and alkaline liquids: the rubber breaks down
All fuels: petrol also with bioethanol (E10, E85), diesel, biodiesel, aviation petrolSteam and hot water above +120 to +130 °C
Fire-resistant hydraulic fluid HFD-R (phosphate esters)Formic acid and strong acetic acid (low-molecular organic acids)
Ozone, UV and sunlight (hardly any ageing)Severe cold below -20 °C with standard FPM: it hardens and leaks
Deep vacuum (very little outgassing)Hot fluorine gas and hydrofluoric acid (HF)

Safety: if the seal is heated above +300 °C (fire, gas torch), FPM releases toxic hydrogen fluoride. Do not touch the burnt residue with bare hands: it forms hydrofluoric acid and causes chemical burns.

We recommend: Industrial chemicals

View all

We recommend: Tools

View all