Photo 1

Pressure oil seal 45x62x6/6,5 BABSL FPM

Code111216V
In stock16pcs
Priceexcl. VATFrom PLN 37.79/pcs
Pressure oil seal 45x62x6/6,5 BABSL FPM—
PLN 37.79excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeBABSL
Material typeFPM
PressureP < 10bar
BrandSOG
Weight21g
Rotary seal dimension
Shaft Diameter45mm
Housing diameter62mm
Width 16mm
Width 26,5mm

Description

The BABSL pressure oil seal made of fluoroelastomer (FKM) is intended for sealing rotating shafts in systems working under pressure. The seal profile has a rigid construction reinforced with a metal insert and spring loading, which ensures stability of the sealing lip and effective operation under pressure loads of up to 10 bar. Fluoroelastomers are highly resistant to chemical agents, mineral oils and elevated temperatures. Technical data Inner diameter (d): 45 mm Outer diameter (D): 62 mm Height / thickness (H): 6 mm / 6,5 mm Working pressure: up to 10 bar Material: FKM

Material

FPM / FKM (fluoroelastomer, Viton®)

  • Operating temperature-20 °C to +200 °C

Good for high temperature, all fuels and oils, ozone and sunlight. Not for brake fluid, acetone-type solvents, ammonia, hot steam or severe cold.

Chemical resistance
Can be usedDo not use
High temperatures, continuously up to +200 °CAcetone, MEK, dioxane, ethyl acetate and similar solvents
Mineral and synthetic oils, incl. engine oil and oils with aggressive additivesBrake fluid (DOT 3, DOT 4, DOT 5.1): the ring swells
Benzene, toluene, xylene, trichloroethylene (aromatic and chlorinated solvents)Ammonia, amines and alkaline liquids: the rubber breaks down
All fuels: petrol also with bioethanol (E10, E85), diesel, biodiesel, aviation petrolSteam and hot water above +120 to +130 °C
Fire-resistant hydraulic fluid HFD-R (phosphate esters)Formic acid and strong acetic acid (low-molecular organic acids)
Ozone, UV and sunlight (hardly any ageing)Severe cold below -20 °C with standard FPM: it hardens and leaks
Deep vacuum (very little outgassing)Hot fluorine gas and hydrofluoric acid (HF)

Safety: if the seal is heated above +300 °C (fire, gas torch), FPM releases toxic hydrogen fluoride. Do not touch the burnt residue with bare hands: it forms hydrofluoric acid and causes chemical burns.

We recommend: Industrial chemicals

View all

We recommend: Tools

View all