Photo 1

Pressure oil seal 80x100x7/8 BABSL NBR

Code12001718B
In stock2pcs
Priceexcl. VATFrom €7.65/pcs
Pressure oil seal 80x100x7/8 BABSL NBR—
€7.65excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeBABSL
Material typeNBR
PressureP < 10bar
BrandCorteco
Weight34g
Rotary seal dimension
Shaft Diameter80mm
Housing diameter100mm
Width 17mm
Width 28mm

Documents

  • Freudenberg BABSL - cataloguepdf file
    Download

Description

The 80×100×7/8 BABSL NBR pressure oil seal is a rotary shaft seal made of nitrile rubber (NBR). The Corteco 12001718B model is intended for use in hydraulic systems where tightness must be maintained at increased pressure. The BABSL profile has a short sealing lip, a garter spring and an additional dust lip, which ensures stable operation of the seal during rotary motion of the shaft. Technical data: Inner diameter (d): 80 mm Outer diameter (D): 100 mm Height (H): 7 / 8 mm Inch size: 3.15 × 3.94 × 0.28 / 0.31 in Material: NBR (nitrile rubber) Design type: BABSL - oil seal intended for operation at increased pressure Maximum working pressure: indicatively up to about 10 bar Application: hydraulic pumps, hydraulic motors, gearboxes, industrial and construction machinery

Material

NBR (nitrile butadiene rubber)

  • Operating temperature-30 °C to +100 °C

Good with oils, fuels, water and compressed air. Not for brake fluid, solvents, strong acids or sunlight.

Chemical resistance
Can be usedDo not use
Mineral oil, grease and hydraulic oil (H, H-L, H-LP)Brake fluid (DOT 3, DOT 4, DOT 5.1): the ring swells quickly
Diesel, fuel oil, keroseneSunlight and open air (ozone): the rubber cracks
Petrol (gasoline), propane, butaneAcetone, MEK, ethyl acetate and similar solvents
Water and water-based liquids, up to +80 °CBenzene, toluene, trichloroethylene (aromatic and chlorinated solvents)
Compressed air, also with oil mistSynthetic ester oils and fire-resistant fluid HFD-R
Water-based fire-resistant hydraulic fluids (HFA, HFB, HFC)Strong (concentrated) acids, e.g. nitric and sulfuric, and strong oxidizers
Oil-and-water emulsionsSteam and hot water above +100 °C
Weak acids, alkalis and salt solutions, at room temperature
Use with cautionPetrol with a lot of bioethanol (E10, E85): better use FKM (Viton)

Shows low compression set within the recommended temperature range.

We recommend: Industrial chemicals

View all

We recommend: Tools

View all