Photo 1

Rod seal RSD 6x14x5,8 PU

CodeRSD 0060 0140 058 C0
AvailabilityOn request
Rod seal RSD 6x14x5,8 PU—

Technical data

Properties
Seal typeRSD
Material typePU
Material codeC0
Foreign code2ERSD001
BrandArtic seals
Weight2g
Hydraulic seals dimension
Rod diameter d6mm
Groove Diameter D14mm
Seal width h5,8mm

Documents

Description

The RSD-type gland seal from the renowned Italian manufacturer Artic Seals is a double-lip ring with the manufacturer code [2ERSD001]. Made of polyurethane C0 (polyester-caprolactam based), it is an ideal solution for hydraulic cylinders. Thanks to the elasticity of the material, both lips are pressed against the mating surface. The additional lip stabilises the seal and protects it against external contamination. The design of the ring prevents the stick-slip effect and supports the sealing action at low temperatures. Technical data: Working pressure: up to 400 bar Linear speed: up to 0,5 m/s Hardness: 93 Shore A ±2 Material: polyurethane C0 with high abrasion resistance and low compression set The product with dimensions 6x14x5,8 PU, available in the online shop elastoring.eu, is an excellent choice for those looking for reliable and durable gland seals.

Material

PU / TPU / H-PU (polyurethane)

  • Standard PU / TPU-30 °C to +80 °C

Best for high pressure and abrasion, in mineral hydraulic oil. Standard PU must never meet hot water, steam or brake fluid, or run hotter than +90 °C.

Chemical resistance
Can be usedDo not use
Extreme pressure and pulsation (up to 40-50 MPa, very resistant to extrusion into the gap)Hot water and steam with standard PU: hydrolysis, it breaks down into powder
Abrasion, friction, cutting and tearing (4-5 times tougher than NBR)Glycol brake fluid (DOT 3, DOT 4, DOT 5.1): swells quickly
Mineral hydraulic oil (HL, HLP) and greaseHigh temperatures above +90 to +100 °C with standard TPU: it softens
Fuel oil, diesel and technical oils (aliphatic hydrocarbons)Strong (concentrated) acids and alkalis: sulfuric, nitric, caustic soda
Ozone, weather and sunlight (does not crack from weather)Acetone, MEK, toluene, benzene, dichloromethane (polar and aromatic solvents)
Water-based fire-resistant fluids HFA, HFB (only special H-PU)Synthetic ester oils and fire-resistant fluid HFD-R
Dry compressed air and technical gasesStrong alcohols (methanol, ethanol): swelling

Water and heat destroy standard PU: above +50 to +60 °C in water or damp oil it turns into a sticky paste or crumbles. If the system contains water or an emulsion, use only H-PU (hydrolysis-resistant).

We recommend: Industrial chemicals

View all

We recommend: Tools

View all