Photo 1

Rod seal RSD 97x105x13 PU

CodeRSD 0970 1050 130 C0
In stock36pcs
Priceexcl. VATFrom €3.63/pcs
Rod seal RSD 97x105x13 PU—
€3.63excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeRSD
Material typePU
Material codeC0
Foreign code2ERSD671
BrandArtic seals
Weight18g
Hydraulic seals dimension
Rod diameter d97mm
Groove Diameter D105mm
Seal width h13mm

Documents

Description

Product description: The RSD 97x105x13 PU U-ring, manufacturer code 2ERSD671, is a double-lip sealing ring from the renowned Italian manufacturer Artic Seals. Made of polyurethane C0, polyester-caprolactam based, it is an ideal solution for use in hydraulic cylinders. The design of the ring ensures that both lips are pressed against the mating surface, which is made possible by the elasticity of the material. The additional lip stabilises the seal and protects it against external contamination. Technical data: Seal size: 97x105x13 Working pressure: up to 400 bar Linear speed: up to 0,5 m/s Hardness: 93 Shore A ±2 Material: polyurethane C0 with high abrasion resistance and low compression set The RSD 97x105x13 PU U-ring from Artic Seals is a product that combines advanced technology with the highest standards of workmanship.

Material

PU / TPU / H-PU (polyurethane)

  • Standard PU / TPU-30 °C to +80 °C

Best for high pressure and abrasion, in mineral hydraulic oil. Standard PU must never meet hot water, steam or brake fluid, or run hotter than +90 °C.

Chemical resistance
Can be usedDo not use
Extreme pressure and pulsation (up to 40-50 MPa, very resistant to extrusion into the gap)Hot water and steam with standard PU: hydrolysis, it breaks down into powder
Abrasion, friction, cutting and tearing (4-5 times tougher than NBR)Glycol brake fluid (DOT 3, DOT 4, DOT 5.1): swells quickly
Mineral hydraulic oil (HL, HLP) and greaseHigh temperatures above +90 to +100 °C with standard TPU: it softens
Fuel oil, diesel and technical oils (aliphatic hydrocarbons)Strong (concentrated) acids and alkalis: sulfuric, nitric, caustic soda
Ozone, weather and sunlight (does not crack from weather)Acetone, MEK, toluene, benzene, dichloromethane (polar and aromatic solvents)
Water-based fire-resistant fluids HFA, HFB (only special H-PU)Synthetic ester oils and fire-resistant fluid HFD-R
Dry compressed air and technical gasesStrong alcohols (methanol, ethanol): swelling

Water and heat destroy standard PU: above +50 to +60 °C in water or damp oil it turns into a sticky paste or crumbles. If the system contains water or an emulsion, use only H-PU (hydrolysis-resistant).

We recommend: Industrial chemicals

View all

We recommend: Tools

View all