Static seal OP 127,6x118,2x7 PU
| Code | 48006892 | |
|---|---|---|
| In stock | 42 | pcs |
| Priceexcl. VAT | From PLN 22.20 | /pcs |
Static seal OP 127,6x118,2x7 PU—
PLN 22.20excl. VAT
Price by quantityexcl. VAT
Available for registered usersSign in or create an account
Technical data
| Seal type | OP | |
|---|---|---|
| Material type | PU | |
| Brand | Aston seals | |
| Weight | 15 | g |
| Groove Diameter D | 127,6 | mm |
|---|---|---|
| Groove width H | 7 | mm |
| Groove Diameter d | 118,2 | mm |
Material
PU / TPU / H-PU (polyurethane)
- Standard PU / TPU-30 °C to +80 °C
Best for high pressure and abrasion, in mineral hydraulic oil. Standard PU must never meet hot water, steam or brake fluid, or run hotter than +90 °C.
| Can be used | Do not use |
|---|---|
| Extreme pressure and pulsation (up to 40-50 MPa, very resistant to extrusion into the gap) | Hot water and steam with standard PU: hydrolysis, it breaks down into powder |
| Abrasion, friction, cutting and tearing (4-5 times tougher than NBR) | Glycol brake fluid (DOT 3, DOT 4, DOT 5.1): swells quickly |
| Mineral hydraulic oil (HL, HLP) and grease | High temperatures above +90 to +100 °C with standard TPU: it softens |
| Fuel oil, diesel and technical oils (aliphatic hydrocarbons) | Strong (concentrated) acids and alkalis: sulfuric, nitric, caustic soda |
| Ozone, weather and sunlight (does not crack from weather) | Acetone, MEK, toluene, benzene, dichloromethane (polar and aromatic solvents) |
| Water-based fire-resistant fluids HFA, HFB (only special H-PU) | Synthetic ester oils and fire-resistant fluid HFD-R |
| Dry compressed air and technical gases | Strong alcohols (methanol, ethanol): swelling |
Water and heat destroy standard PU: above +50 to +60 °C in water or damp oil it turns into a sticky paste or crumbles. If the system contains water or an emulsion, use only H-PU (hydrolysis-resistant).
We recommend: Industrial chemicals
View all
WEICON Cleaner S metal degreaser 500ml [11202500-51]- Code
- 10037512
- In stock
- 31pcs
- Price excl. VAT
- PLN 26.65/ pcs
WEICON Fitting Spray 200 ml- Code
- 10037560
- In stock
- 8pcs
- Price excl. VAT
- PLN 46.48/ pcs
WEICON Freeze Spray 400 ml- Code
- 10037564
- In stock
- 12pcs
- Price excl. VAT
- PLN 56.56/ pcs
Copper assembly paste Weicon Copper Paste 120 g [26200012]- Code
- 10026335
- In stock
- 20pcs
- Price excl. VAT
- PLN 37.09/ pcs
WEICON AL-M Allround Lubricant Long-term grease 400 g [26400040-51]- Code
- 10046471
- In stock
- 7pcs
- Price excl. VAT
- PLN 44.29/ pcs
WEICON Plastic Cleaner plastic cleaning spray 500ml [11204500-51]- Code
- 10037520
- In stock
- 27pcs
- Price excl. VAT
- PLN 32.94/ pcs
Hand Protective Foam 250 ml- Code
- 10021320
- In stock
- 10pcs
- Price excl. VAT
- PLN 70.00/ pcs
WEICON PTFE Spray 400 ml- Code
- 10037539
- In stock
- 10pcs
- Price excl. VAT
- PLN 65.52/ pcs
We recommend: Tools
View all
Tool for install and disassembly of oil seals [SEAL DIGGER]- Code
- 48003372
- In stock
- 2pcs
- Price excl. VAT
- PLN 488.39/ pcs
Seal Installation Tool Kit [SEALTOOL]- Code
- 48004577
- In stock
- On request
- Price excl. VAT
- On request
O-Ring Removal Tool Set [OR PICKER]- Code
- 48004797
- In stock
- 1pcs
- Price excl. VAT
- PLN 92.40/ pcs
Seal stretcher [o40MM-250MM]- Code
- 48003371
- In stock
- 3pcs
- Price excl. VAT
- PLN 1,191.91/ pcs
Seal twistors set- Code
- 48003242
- In stock
- 43pcs
- Price excl. VAT
- PLN 345.93/ pcs
%5D-4.jpg)
Piston Seal Constrictor [CALIBRATING TOOL FOR E/GR(800)]- Code
- 48003370
- In stock
- 2pcs
- Price excl. VAT
- PLN 91.28/ pcs
Deep seal twistor set- Code
- 48003373
- In stock
- On request
- Price excl. VAT
- On request
Yato Seal Removal Kit- Code
- 48005237
- In stock
- 27pcs
- Price excl. VAT
- PLN 11.73/ pcs