Wiper K06 16x24x5/7
| Code | K06-016 PU | |
|---|---|---|
| In stock | 19 | pcs |
| Priceexcl. VAT | From PLN 6.04 | /pcs |
Wiper K06 16x24x5/7—
PLN 6.04excl. VAT
Price by quantityexcl. VAT
Available for registered usersSign in or create an account
Similar
StockCode
Technical data
| Seal type | K06 | |
|---|---|---|
| Material type | PU | |
| Material code | PU9201 | |
| Brand | Kastas | |
| Weight | 3 | g |
| Inside diameter d | 16 | mm |
|---|---|---|
| Outside diameter D | 24 | mm |
| Width h | 5 | mm |
| Width H | 7 | mm |
Documents
- Kastas K06 - cataloguepdf fileDownload
Description
K06 wiper rings are installed in hydraulic cylinders to remove dirt, contaminant particles, moisture, etc. from the piston rod (tube), thereby protecting the hydraulic system from contamination. These wiper elements are selected by the following dimensions: inner diameter 16 mm, outer diameter 24 mm, seal height 5/7 mm. Made of PU PU9201
Material
PU / TPU / H-PU (polyurethane)
- Standard PU / TPU-30 °C to +80 °C
Best for high pressure and abrasion, in mineral hydraulic oil. Standard PU must never meet hot water, steam or brake fluid, or run hotter than +90 °C.
| Can be used | Do not use |
|---|---|
| Extreme pressure and pulsation (up to 40-50 MPa, very resistant to extrusion into the gap) | Hot water and steam with standard PU: hydrolysis, it breaks down into powder |
| Abrasion, friction, cutting and tearing (4-5 times tougher than NBR) | Glycol brake fluid (DOT 3, DOT 4, DOT 5.1): swells quickly |
| Mineral hydraulic oil (HL, HLP) and grease | High temperatures above +90 to +100 °C with standard TPU: it softens |
| Fuel oil, diesel and technical oils (aliphatic hydrocarbons) | Strong (concentrated) acids and alkalis: sulfuric, nitric, caustic soda |
| Ozone, weather and sunlight (does not crack from weather) | Acetone, MEK, toluene, benzene, dichloromethane (polar and aromatic solvents) |
| Water-based fire-resistant fluids HFA, HFB (only special H-PU) | Synthetic ester oils and fire-resistant fluid HFD-R |
| Dry compressed air and technical gases | Strong alcohols (methanol, ethanol): swelling |
Water and heat destroy standard PU: above +50 to +60 °C in water or damp oil it turns into a sticky paste or crumbles. If the system contains water or an emulsion, use only H-PU (hydrolysis-resistant).
We recommend: Industrial chemicals
View all
Hand Protective Foam 250 ml- Code
- 10021320
- In stock
- 10pcs
- Price excl. VAT
- PLN 70.00/ pcs
WEICON Rust Shock 400 ml- Code
- 10037497
- In stock
- 12pcs
- Price excl. VAT
- PLN 52.08/ pcs
WEICON Pneuma-Lube Spray 400 ml- Code
- 10049380
- In stock
- 12pcs
- Price excl. VAT
- PLN 55.44/ pcs
WEICONLOCK AN 302-22 thread locking agent 50 ml [30222150]- Code
- 10017872
- In stock
- 13pcs
- Price excl. VAT
- PLN 82.32/ pcs
Weicon Contact Spray 400ml- Code
- 10037501
- In stock
- 68pcs
- Price excl. VAT
- PLN 24.53/ pcs
WEICON Rust Converter 400 ml- Code
- 10049153
- In stock
- 9pcs
- Price excl. VAT
- PLN 52.08/ pcs
WEICON O-Ring Bonding Set [12508030]- Code
- 10034766
- In stock
- 3pcs
- Price excl. VAT
- PLN 157.39/ pcs
Weicon Silicone grease 85g- Code
- 10050566
- In stock
- 19pcs
- Price excl. VAT
- PLN 70.00/ pcs
We recommend: Tools
View all
O-Ring Cutting Tool [OR CHOPPER]- Code
- 48008744
- In stock
- 2pcs
- Price excl. VAT
- PLN 181.87/ pcs
Seal stretcher [o40MM-250MM]- Code
- 48003371
- In stock
- 3pcs
- Price excl. VAT
- PLN 1,191.91/ pcs
Seal clasper- Code
- 48003739
- In stock
- 15pcs
- Price excl. VAT
- PLN 858.07/ pcs
Seal Installation Tool Kit [SEALTOOL]- Code
- 48004577
- In stock
- On request
- Price excl. VAT
- On request
Inner groove caliper- Code
- 48003254
- In stock
- 1pcs
- Price excl. VAT
- PLN 598.59/ pcs
O-Ring Removal Tool Set [OR PICKER]- Code
- 48004797
- In stock
- 1pcs
- Price excl. VAT
- PLN 92.40/ pcs
Seal hook set- Code
- 48003740
- In stock
- 24pcs
- Price excl. VAT
- PLN 180.18/ pcs
ULTRASHARP 4.0- Code
- 48003255
- In stock
- 3pcs
- Price excl. VAT
- PLN 387.53/ pcs