Photo 1

High pressure oil seal 35x52x5 BAKHDSN NBR

Code1902006
In stock80pcs
Priceexcl. VATFrom PLN 69.23/pcs
High pressure oil seal 35x52x5 BAKHDSN NBR—
PLN 69.23excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeBAKHDSN
Material typeNBR
PressureP > 10Bar
BrandDMHUI
Weight10g
Rotary seal dimension
Shaft Diameter35mm
Housing diameter52mm
Width 15mm

Description

The High-pressure seal 35x52x5 BAKHDSN NBR is a specialised seal for a hydraulic engine shaft. It is used in hydrokinetic drives, where high pressure resistance is required. The seal is characterised by an open metal insert on the front side, which forms a stable contact surface. As a result, the seal is protected from deformation under pressure. The product is made of NBR, or nitrile rubber. The maximum working pressure is 150 bar, while the average working pressure is 100 bar. The maximum linear speed of the seal is 2 m/s. Seals marked with the symbols BAHD, BAHDSN and BAKHDSN are interchangeable and can be used interchangeably in the same applications. The product is designed to work under difficult conditions, where high reliability and durability of the seal are required. We invite you to purchase the high-pressure seal 35x52x5 BAKHDSN NBR in our online store lemming.shop.

Material

NBR (nitrile butadiene rubber)

  • Operating temperature-30 °C to +100 °C

Good with oils, fuels, water and compressed air. Not for brake fluid, solvents, strong acids or sunlight.

Chemical resistance
Can be usedDo not use
Mineral oil, grease and hydraulic oil (H, H-L, H-LP)Brake fluid (DOT 3, DOT 4, DOT 5.1): the ring swells quickly
Diesel, fuel oil, keroseneSunlight and open air (ozone): the rubber cracks
Petrol (gasoline), propane, butaneAcetone, MEK, ethyl acetate and similar solvents
Water and water-based liquids, up to +80 °CBenzene, toluene, trichloroethylene (aromatic and chlorinated solvents)
Compressed air, also with oil mistSynthetic ester oils and fire-resistant fluid HFD-R
Water-based fire-resistant hydraulic fluids (HFA, HFB, HFC)Strong (concentrated) acids, e.g. nitric and sulfuric, and strong oxidizers
Oil-and-water emulsionsSteam and hot water above +100 °C
Weak acids, alkalis and salt solutions, at room temperature
Use with cautionPetrol with a lot of bioethanol (E10, E85): better use FKM (Viton)

Shows low compression set within the recommended temperature range.

We recommend: Industrial chemicals

View all

We recommend: Tools

View all