
Oil seal 117,5x145x13,9 BAOFSFX7 NBR
| Code | 1038001 | |
|---|---|---|
| In stock | 34 | pcs |
| Priceexcl. VAT | From €26.89 | /pcs |
Price by quantityexcl. VAT
Technical data
| Seal type | BAOFSFX7 | |
|---|---|---|
| Material type | NBR | |
| Brand | DMHUI | |
| Weight | 100 | g |
| Shaft Diameter | 117,5 | mm |
|---|---|---|
| Housing diameter | 145 | mm |
| Width 1 | 13,9 | mm |
Description
An oil seal measuring 117,5 × 145 × 13,9 mm, intended for use in POCLAIN MOTOR MSE18 hydraulic motors. Made by the manufacturer DMHUI (China), without a spring, with a corrugated structure on the outer surface matched to aluminium housings. The sealing lip system effectively protects against moisture and contamination entering from outside. Available in two variants: oil seal (item code: 1038001), oil seal with a metal cover (item code: 1038002). Technical parameters: Inner diameter: 117,5 mm (4.63 inch) Outer diameter: 145 mm (5.71 inch) Height: 13,9 mm (0.55 inch) Application: POCLAIN MOTOR MSE18
Material
NBR (nitrile butadiene rubber)
- Operating temperature-30 °C to +100 °C
Good with oils, fuels, water and compressed air. Not for brake fluid, solvents, strong acids or sunlight.
| Can be used | Do not use |
|---|---|
| Mineral oil, grease and hydraulic oil (H, H-L, H-LP) | Brake fluid (DOT 3, DOT 4, DOT 5.1): the ring swells quickly |
| Diesel, fuel oil, kerosene | Sunlight and open air (ozone): the rubber cracks |
| Petrol (gasoline), propane, butane | Acetone, MEK, ethyl acetate and similar solvents |
| Water and water-based liquids, up to +80 °C | Benzene, toluene, trichloroethylene (aromatic and chlorinated solvents) |
| Compressed air, also with oil mist | Synthetic ester oils and fire-resistant fluid HFD-R |
| Water-based fire-resistant hydraulic fluids (HFA, HFB, HFC) | Strong (concentrated) acids, e.g. nitric and sulfuric, and strong oxidizers |
| Oil-and-water emulsions | Steam and hot water above +100 °C |
| Weak acids, alkalis and salt solutions, at room temperature | |
| Use with cautionPetrol with a lot of bioethanol (E10, E85): better use FKM (Viton) | |
Shows low compression set within the recommended temperature range.





%5D-4.jpg)