Photo 1

Oil seal 17x28x7 HTC FPM

Code19020127B
In stock5pcs
Priceexcl. VATFrom PLN 32.35/pcs
Oil seal 17x28x7 HTC FPM—
PLN 32.35excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeHTC
Material typeFPM
BrandCorteco
Weight7g
Rotary seal dimension
Shaft Diameter17mm
Housing diameter28mm
Width 17mm

Material

FPM / FKM (fluoroelastomer, Viton®)

  • Operating temperature-20 °C to +200 °C

Good for high temperature, all fuels and oils, ozone and sunlight. Not for brake fluid, acetone-type solvents, ammonia, hot steam or severe cold.

Chemical resistance
Can be usedDo not use
High temperatures, continuously up to +200 °CAcetone, MEK, dioxane, ethyl acetate and similar solvents
Mineral and synthetic oils, incl. engine oil and oils with aggressive additivesBrake fluid (DOT 3, DOT 4, DOT 5.1): the ring swells
Benzene, toluene, xylene, trichloroethylene (aromatic and chlorinated solvents)Ammonia, amines and alkaline liquids: the rubber breaks down
All fuels: petrol also with bioethanol (E10, E85), diesel, biodiesel, aviation petrolSteam and hot water above +120 to +130 °C
Fire-resistant hydraulic fluid HFD-R (phosphate esters)Formic acid and strong acetic acid (low-molecular organic acids)
Ozone, UV and sunlight (hardly any ageing)Severe cold below -20 °C with standard FPM: it hardens and leaks
Deep vacuum (very little outgassing)Hot fluorine gas and hydrofluoric acid (HF)

Safety: if the seal is heated above +300 °C (fire, gas torch), FPM releases toxic hydrogen fluoride. Do not touch the burnt residue with bare hands: it forms hydrofluoric acid and causes chemical burns.

We recommend: Industrial chemicals

View all

We recommend: Tools

View all