
Rod-piston seal 160x190x15 GPUM NBR
| Code | 11C096Y0 | |
|---|---|---|
| In stock | 60 | pcs |
| Priceexcl. VAT | From €12.42 | /pcs |
Rod-piston seal 160x190x15 GPUM NBR—
€12.42excl. VAT
Price by quantityexcl. VAT
Available for registered usersSign in or create an account
Available to order
- 18 pcs21–30 days
Technical data
| Seal type | GPUM | |
|---|---|---|
| Material type | NBR | |
| Brand | OEM | |
| Weight | 210 | g |
| Country of origin | Italy | |
| CN code | 40169093 |
| Rod diameter d | 160 | mm |
|---|---|---|
| Groove Diameter D | 190 | mm |
| Seal width h | 15 | mm |
Material
NBR (nitrile butadiene rubber)
- Operating temperature-30 °C to +100 °C
Good with oils, fuels, water and compressed air. Not for brake fluid, solvents, strong acids or sunlight.
| Can be used | Do not use |
|---|---|
| Mineral oil, grease and hydraulic oil (H, H-L, H-LP) | Brake fluid (DOT 3, DOT 4, DOT 5.1): the ring swells quickly |
| Diesel, fuel oil, kerosene | Sunlight and open air (ozone): the rubber cracks |
| Petrol (gasoline), propane, butane | Acetone, MEK, ethyl acetate and similar solvents |
| Water and water-based liquids, up to +80 °C | Benzene, toluene, trichloroethylene (aromatic and chlorinated solvents) |
| Compressed air, also with oil mist | Synthetic ester oils and fire-resistant fluid HFD-R |
| Water-based fire-resistant hydraulic fluids (HFA, HFB, HFC) | Strong (concentrated) acids, e.g. nitric and sulfuric, and strong oxidizers |
| Oil-and-water emulsions | Steam and hot water above +100 °C |
| Weak acids, alkalis and salt solutions, at room temperature | |
| Use with cautionPetrol with a lot of bioethanol (E10, E85): better use FKM (Viton) | |
Shows low compression set within the recommended temperature range.







-0.jpg)
