Photo 1

Rod seal K33 80x95x12

CodeK33-080/5 PU
In stock14pcs
Priceexcl. VATFrom €3.89/pcs
Rod seal K33 80x95x12—
€3.89excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeK33
Material typePU
Material codePU9401
BrandKastas
Weight50g
Hydraulic seals dimension
Rod diameter d80mm
Groove Diameter D95mm
Seal width h12mm

Documents

Description

The K33 80x95x12 ring is a single-acting rod seal made of PU9401 polyurethane. This type of design features a shorter inner lip, a longer outer lip and an additional sealing edge. As a result, it provides effective sealing and protection against the ingress of contamination from the wiper side. Technical parameters: Inner diameter (d): 80 mm Outer diameter (D): 95 mm Height (H): 12 mm Size in inches: d x D x H = 80x95x12 mm ≈ 3.15”x3.74”x0.47” Material: Polyurethane (PU9401) Working pressure: up to 400 bar Travel speed: up to 0,5 m/s Seal type: single-acting, PU profile Application: construction machinery, forklifts, injection moulding machines, agricultural machinery, loading platforms and standard cylinders

Material

PU / TPU / H-PU (polyurethane)

  • Standard PU / TPU-30 °C to +80 °C

Best for high pressure and abrasion, in mineral hydraulic oil. Standard PU must never meet hot water, steam or brake fluid, or run hotter than +90 °C.

Chemical resistance
Can be usedDo not use
Extreme pressure and pulsation (up to 40-50 MPa, very resistant to extrusion into the gap)Hot water and steam with standard PU: hydrolysis, it breaks down into powder
Abrasion, friction, cutting and tearing (4-5 times tougher than NBR)Glycol brake fluid (DOT 3, DOT 4, DOT 5.1): swells quickly
Mineral hydraulic oil (HL, HLP) and greaseHigh temperatures above +90 to +100 °C with standard TPU: it softens
Fuel oil, diesel and technical oils (aliphatic hydrocarbons)Strong (concentrated) acids and alkalis: sulfuric, nitric, caustic soda
Ozone, weather and sunlight (does not crack from weather)Acetone, MEK, toluene, benzene, dichloromethane (polar and aromatic solvents)
Water-based fire-resistant fluids HFA, HFB (only special H-PU)Synthetic ester oils and fire-resistant fluid HFD-R
Dry compressed air and technical gasesStrong alcohols (methanol, ethanol): swelling

Water and heat destroy standard PU: above +50 to +60 °C in water or damp oil it turns into a sticky paste or crumbles. If the system contains water or an emulsion, use only H-PU (hydrolysis-resistant).

We recommend: Industrial chemicals

View all

We recommend: Tools

View all