Photo 1

Rod seal RSD 36x44x5,7 PU

CodeRSD 0360 0440 058 C0
In stock148pcs
Priceexcl. VATFrom €2.22/pcs
Rod seal RSD 36x44x5,7 PU—
€2.22excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeRSD
Material typePU
Material codeC0
BrandArtic seals
Weight3g
Hydraulic seals dimension
Rod diameter d36mm
Groove Diameter D44mm
Seal width h5,7mm

Documents

Description

The RSD 36x44x5,7 PU ring is a double-lip sealing ring from the renowned Italian manufacturer Artic Seals. Made of polyurethane C0, this ring is ideal for use in hydraulic cylinders. Seal size: Inner diameter: 36 mm Outer diameter: 44 mm Thickness: 5,7 mm Manufacturer code: RSD Material: Polyurethane (PU) The RSD 36x44x5,7 PU ring is characterised by high abrasion resistance and low compression set. Technical data: Working pressure: up to 400 bar Linear speed: up to 0,5 m/s Hardness: 93 Shore A ±2 The RSD 36x44x5,7 PU ring is a reliable and efficient solution for your sealing needs.

Material

PU / TPU / H-PU (polyurethane)

  • Standard PU / TPU-30 °C to +80 °C

Best for high pressure and abrasion, in mineral hydraulic oil. Standard PU must never meet hot water, steam or brake fluid, or run hotter than +90 °C.

Chemical resistance
Can be usedDo not use
Extreme pressure and pulsation (up to 40-50 MPa, very resistant to extrusion into the gap)Hot water and steam with standard PU: hydrolysis, it breaks down into powder
Abrasion, friction, cutting and tearing (4-5 times tougher than NBR)Glycol brake fluid (DOT 3, DOT 4, DOT 5.1): swells quickly
Mineral hydraulic oil (HL, HLP) and greaseHigh temperatures above +90 to +100 °C with standard TPU: it softens
Fuel oil, diesel and technical oils (aliphatic hydrocarbons)Strong (concentrated) acids and alkalis: sulfuric, nitric, caustic soda
Ozone, weather and sunlight (does not crack from weather)Acetone, MEK, toluene, benzene, dichloromethane (polar and aromatic solvents)
Water-based fire-resistant fluids HFA, HFB (only special H-PU)Synthetic ester oils and fire-resistant fluid HFD-R
Dry compressed air and technical gasesStrong alcohols (methanol, ethanol): swelling

Water and heat destroy standard PU: above +50 to +60 °C in water or damp oil it turns into a sticky paste or crumbles. If the system contains water or an emulsion, use only H-PU (hydrolysis-resistant).

We recommend: Industrial chemicals

View all

We recommend: Tools

View all