Photo 1

Rod seal RSD 36x44x8 PU

CodeRSD 0360 0440 080 C0
In stock22pcs
Priceexcl. VATFrom €2.22/pcs
Rod seal RSD 36x44x8 PU—
€2.22excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeRSD
Material typePU
Material codeC0
Foreign code2ERSD295
BrandArtic seals
Weight4g
Hydraulic seals dimension
Rod diameter d36mm
Groove Diameter D44mm
Seal width h8mm

Documents

Description

The RSD 36x44x8 PU U-ring, marked with the manufacturer code 2ERSD295, is a product of the Italian manufacturer Artic Seals. Made of polyurethane C0, it is intended for use in hydraulic cylinders. Product features: - Seal type: double-lip ring - Material: polyurethane C0 (polyester-caprolactam based) - Application: hydraulic cylinders - Design: two lips pressed against the mating surface, plus an additional lip that stabilises the seal and protects it against external contamination Technical data: - Working pressure: up to 400 bar - Linear speed: up to 0,5 m/s - Hardness: 93 Shore A ±2 - Material: polyurethane C0 with high abrasion resistance and low compression set Seal size: - Inner diameter: 36 mm - Outer diameter: 44 mm - Thickness: 8 mm Manufacturer code: 2ERSD295 The RSD 36x44x8 PU 2ERSD295 U-ring is a reliable gland seal that delivers excellent performance at low temperatures and prevents the stick-slip effect.

Material

PU / TPU / H-PU (polyurethane)

  • Standard PU / TPU-30 °C to +80 °C

Best for high pressure and abrasion, in mineral hydraulic oil. Standard PU must never meet hot water, steam or brake fluid, or run hotter than +90 °C.

Chemical resistance
Can be usedDo not use
Extreme pressure and pulsation (up to 40-50 MPa, very resistant to extrusion into the gap)Hot water and steam with standard PU: hydrolysis, it breaks down into powder
Abrasion, friction, cutting and tearing (4-5 times tougher than NBR)Glycol brake fluid (DOT 3, DOT 4, DOT 5.1): swells quickly
Mineral hydraulic oil (HL, HLP) and greaseHigh temperatures above +90 to +100 °C with standard TPU: it softens
Fuel oil, diesel and technical oils (aliphatic hydrocarbons)Strong (concentrated) acids and alkalis: sulfuric, nitric, caustic soda
Ozone, weather and sunlight (does not crack from weather)Acetone, MEK, toluene, benzene, dichloromethane (polar and aromatic solvents)
Water-based fire-resistant fluids HFA, HFB (only special H-PU)Synthetic ester oils and fire-resistant fluid HFD-R
Dry compressed air and technical gasesStrong alcohols (methanol, ethanol): swelling

Water and heat destroy standard PU: above +50 to +60 °C in water or damp oil it turns into a sticky paste or crumbles. If the system contains water or an emulsion, use only H-PU (hydrolysis-resistant).

We recommend: Industrial chemicals

View all

We recommend: Tools

View all