Photo 1

Rod seal RSD 56x66x6,5 PU

CodeRSD 0560 0660 065 C0
AvailabilityOn request
Rod seal RSD 56x66x6,5 PU—

Technical data

Properties
Seal typeRSD
Material typePU
Material codeC0
Foreign code2ERSD445
BrandArtic seals
Weight10g
Hydraulic seals dimension
Rod diameter d56mm
Groove Diameter D66mm
Seal width h6,5mm

Documents

Description

The RSD 56x66x6,5 PU U-ring is a product from the renowned Italian manufacturer Artic Seals. This double-lip ring, made of polyurethane C0, is ideal for use in hydraulic cylinders. Its design ensures excellent sealing, and the additional lip protects against external contamination. The RSD 56x66x6,5 PU U-ring prevents the stick-slip effect and works effectively even at low temperatures. Technical data: Seal size: 56x66x6,5 Manufacturer code: 2ERSD445 Material: Polyurethane C0 Working pressure: up to 400 bar Linear speed: up to 0,5 m/s Hardness: 93 Shore A ±2 The RSD 56x66x6,5 PU U-ring is a product with high abrasion resistance and low compression set. Ideal for use in hydraulic cylinders, it provides excellent sealing and protection against external contamination.

Material

PU / TPU / H-PU (polyurethane)

  • Standard PU / TPU-30 °C to +80 °C

Best for high pressure and abrasion, in mineral hydraulic oil. Standard PU must never meet hot water, steam or brake fluid, or run hotter than +90 °C.

Chemical resistance
Can be usedDo not use
Extreme pressure and pulsation (up to 40-50 MPa, very resistant to extrusion into the gap)Hot water and steam with standard PU: hydrolysis, it breaks down into powder
Abrasion, friction, cutting and tearing (4-5 times tougher than NBR)Glycol brake fluid (DOT 3, DOT 4, DOT 5.1): swells quickly
Mineral hydraulic oil (HL, HLP) and greaseHigh temperatures above +90 to +100 °C with standard TPU: it softens
Fuel oil, diesel and technical oils (aliphatic hydrocarbons)Strong (concentrated) acids and alkalis: sulfuric, nitric, caustic soda
Ozone, weather and sunlight (does not crack from weather)Acetone, MEK, toluene, benzene, dichloromethane (polar and aromatic solvents)
Water-based fire-resistant fluids HFA, HFB (only special H-PU)Synthetic ester oils and fire-resistant fluid HFD-R
Dry compressed air and technical gasesStrong alcohols (methanol, ethanol): swelling

Water and heat destroy standard PU: above +50 to +60 °C in water or damp oil it turns into a sticky paste or crumbles. If the system contains water or an emulsion, use only H-PU (hydrolysis-resistant).

We recommend: Industrial chemicals

View all

We recommend: Tools

View all