Photo 1

Rod seal RSD 75x83x6,3 PU

CodeRSD 0750 0830 063 C0
In stock58pcs
Priceexcl. VATFrom PLN 13.85/pcs
Rod seal RSD 75x83x6,3 PU—
PLN 13.85excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeRSD
Material typePU
Material codeC0
Foreign code2ERSD569
BrandArtic seals
Weight7g
Hydraulic seals dimension
Rod diameter d75mm
Groove Diameter D83mm
Seal width h6,3mm

Documents

Description

The RSD 75x83x6,3 PU U-ring is a product from the renowned Italian manufacturer Artic Seals. This double-lip ring, made of polyurethane C0, is an ideal solution for hydraulic cylinders. Thanks to its design, the ring not only provides excellent sealing but also protects against external contamination and supports the sealing action at low temperatures. The manufacturer code for this product is 2ERSD569. Seal size: Inner diameter: 75 mm Outer diameter: 83 mm Thickness: 6,3 mm Technical data: Working pressure: up to 400 bar Linear speed: up to 0,5 m/s Hardness: 93 Shore A ±2 Material: polyurethane C0 with high abrasion resistance and low compression set The RSD 75x83x6,3 PU U-ring is an excellent choice for those looking for a reliable and durable seal for their hydraulic cylinders.

Material

PU / TPU / H-PU (polyurethane)

  • Standard PU / TPU-30 °C to +80 °C

Best for high pressure and abrasion, in mineral hydraulic oil. Standard PU must never meet hot water, steam or brake fluid, or run hotter than +90 °C.

Chemical resistance
Can be usedDo not use
Extreme pressure and pulsation (up to 40-50 MPa, very resistant to extrusion into the gap)Hot water and steam with standard PU: hydrolysis, it breaks down into powder
Abrasion, friction, cutting and tearing (4-5 times tougher than NBR)Glycol brake fluid (DOT 3, DOT 4, DOT 5.1): swells quickly
Mineral hydraulic oil (HL, HLP) and greaseHigh temperatures above +90 to +100 °C with standard TPU: it softens
Fuel oil, diesel and technical oils (aliphatic hydrocarbons)Strong (concentrated) acids and alkalis: sulfuric, nitric, caustic soda
Ozone, weather and sunlight (does not crack from weather)Acetone, MEK, toluene, benzene, dichloromethane (polar and aromatic solvents)
Water-based fire-resistant fluids HFA, HFB (only special H-PU)Synthetic ester oils and fire-resistant fluid HFD-R
Dry compressed air and technical gasesStrong alcohols (methanol, ethanol): swelling

Water and heat destroy standard PU: above +50 to +60 °C in water or damp oil it turns into a sticky paste or crumbles. If the system contains water or an emulsion, use only H-PU (hydrolysis-resistant).

We recommend: Industrial chemicals

View all

We recommend: Tools

View all