Photo 1

Wiper K06 100x108x5/7 NBR

CodeK06-100/1 NBR
In stock7pcs
Priceexcl. VATFrom PLN 12.96/pcs
Wiper K06 100x108x5/7 NBR—
PLN 12.96excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeK06
Material typeNBR
Material codeNB9001
BrandKastas
Weight16g
Wipers dimension
Inside diameter d100mm
Outside diameter D108mm
Width h5mm
Width H7mm

Documents

Description

K06 wiper rings are installed in hydraulic cylinders to remove dirt, contaminant particles, moisture, etc. from the piston rod (tube), thereby protecting the hydraulic system from contamination. These wiper elements are selected by the following dimensions: inner diameter 100 mm, outer diameter 108 mm, seal height 5/7 mm. Made of NBR NB9001

Material

NBR (nitrile butadiene rubber)

  • Operating temperature-30 °C to +100 °C

Good with oils, fuels, water and compressed air. Not for brake fluid, solvents, strong acids or sunlight.

Chemical resistance
Can be usedDo not use
Mineral oil, grease and hydraulic oil (H, H-L, H-LP)Brake fluid (DOT 3, DOT 4, DOT 5.1): the ring swells quickly
Diesel, fuel oil, keroseneSunlight and open air (ozone): the rubber cracks
Petrol (gasoline), propane, butaneAcetone, MEK, ethyl acetate and similar solvents
Water and water-based liquids, up to +80 °CBenzene, toluene, trichloroethylene (aromatic and chlorinated solvents)
Compressed air, also with oil mistSynthetic ester oils and fire-resistant fluid HFD-R
Water-based fire-resistant hydraulic fluids (HFA, HFB, HFC)Strong (concentrated) acids, e.g. nitric and sulfuric, and strong oxidizers
Oil-and-water emulsionsSteam and hot water above +100 °C
Weak acids, alkalis and salt solutions, at room temperature
Use with cautionPetrol with a lot of bioethanol (E10, E85): better use FKM (Viton)

Shows low compression set within the recommended temperature range.

We recommend: Industrial chemicals

View all

We recommend: Tools

View all