Photo 1

Pressure oil seal 17,46x28,58x5,8/6,3 BABSL NBR

Code12012022B
In stock11pcs
Priceexcl. VATFrom €4.91/pcs
Pressure oil seal 17,46x28,58x5,8/6,3 BABSL NBR—
€4.91excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeBABSL
Material typeNBR
PressureP < 10bar
BrandCorteco
Weight4g
Rotary seal dimension
Shaft Diameter17,46mm
Housing diameter28,58mm
Width 15,8mm
Width 26,3mm

Documents

  • Freudenberg BABSL - cataloguepdf file
    Download

Description

The Corteco 12012022B pressure oil seal is a BABSL type radial shaft seal made of NBR elastomer (nitrile rubber). The BABSL design was developed for operation at higher pressure and in environments where effective protection against medium leakage and the ingress of contamination is necessary. Technical parameters: Inner diameter (d): 17,46 mm Outer diameter (D): 28,58 mm Height (H): 5,8 / 6,3 mm Inch size: 0.687″ × 1.125″ × 0.23″ / 0.25″ Design type: BABSL Material: NBR (Nitrile-Butadiene Rubber) Maximum working pressure: up to 10 bar Characteristics of the BABSL type BABSL type seals have a spring-loaded sealing lip and an additional dust lip that protects the interior of the system from dirt. The rubber jacket with metal reinforcement ensures stable seating in the housing. BABSL oil seals are intended for use in hydraulic pumps, motors, gearboxes and other systems where there is pressure on the medium side.

Material

NBR (nitrile butadiene rubber)

  • Operating temperature-30 °C to +100 °C

Good with oils, fuels, water and compressed air. Not for brake fluid, solvents, strong acids or sunlight.

Chemical resistance
Can be usedDo not use
Mineral oil, grease and hydraulic oil (H, H-L, H-LP)Brake fluid (DOT 3, DOT 4, DOT 5.1): the ring swells quickly
Diesel, fuel oil, keroseneSunlight and open air (ozone): the rubber cracks
Petrol (gasoline), propane, butaneAcetone, MEK, ethyl acetate and similar solvents
Water and water-based liquids, up to +80 °CBenzene, toluene, trichloroethylene (aromatic and chlorinated solvents)
Compressed air, also with oil mistSynthetic ester oils and fire-resistant fluid HFD-R
Water-based fire-resistant hydraulic fluids (HFA, HFB, HFC)Strong (concentrated) acids, e.g. nitric and sulfuric, and strong oxidizers
Oil-and-water emulsionsSteam and hot water above +100 °C
Weak acids, alkalis and salt solutions, at room temperature
Use with cautionPetrol with a lot of bioethanol (E10, E85): better use FKM (Viton)

Shows low compression set within the recommended temperature range.

We recommend: Industrial chemicals

View all

We recommend: Tools

View all