Photo 1

Rod seal RSD 35x43x5,8 PU

CodeRSD 0350 0430 058 C0
In stock79pcs
Priceexcl. VATFrom PLN 9.71/pcs
Rod seal RSD 35x43x5,8 PU—
PLN 9.71excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeRSD
Material typePU
Material codeC0
BrandArtic seals
Weight3g
Hydraulic seals dimension
Rod diameter d35mm
Groove Diameter D43mm
Seal width h5,8mm

Documents

Description

The RSD 35x43x5,8 PU ring is a double-lip sealing ring from the renowned Italian manufacturer Artic Seals. Made of polyurethane C0 (polyester-caprolactam based), it is an ideal solution for hydraulic cylinders. Its unique design with an additional lip stabilises the seal and protects it against external contamination, preventing the stick-slip effect and supporting the sealing action at low temperatures. Technical data: Working pressure: up to 400 bar Linear speed: up to 0,5 m/s Hardness: 93 Shore A ±2 Material: polyurethane C0 with high abrasion resistance and low compression set The manufacturer code for this product is [RSD 35x43x5,8 PU]. Buying the RSD 35x43x5,8 PU ring is an investment in reliability and durability. Thanks to its unique properties, it is a product that will certainly meet the expectations of even the most demanding users.

Material

PU / TPU / H-PU (polyurethane)

  • Standard PU / TPU-30 °C to +80 °C

Best for high pressure and abrasion, in mineral hydraulic oil. Standard PU must never meet hot water, steam or brake fluid, or run hotter than +90 °C.

Chemical resistance
Can be usedDo not use
Extreme pressure and pulsation (up to 40-50 MPa, very resistant to extrusion into the gap)Hot water and steam with standard PU: hydrolysis, it breaks down into powder
Abrasion, friction, cutting and tearing (4-5 times tougher than NBR)Glycol brake fluid (DOT 3, DOT 4, DOT 5.1): swells quickly
Mineral hydraulic oil (HL, HLP) and greaseHigh temperatures above +90 to +100 °C with standard TPU: it softens
Fuel oil, diesel and technical oils (aliphatic hydrocarbons)Strong (concentrated) acids and alkalis: sulfuric, nitric, caustic soda
Ozone, weather and sunlight (does not crack from weather)Acetone, MEK, toluene, benzene, dichloromethane (polar and aromatic solvents)
Water-based fire-resistant fluids HFA, HFB (only special H-PU)Synthetic ester oils and fire-resistant fluid HFD-R
Dry compressed air and technical gasesStrong alcohols (methanol, ethanol): swelling

Water and heat destroy standard PU: above +50 to +60 °C in water or damp oil it turns into a sticky paste or crumbles. If the system contains water or an emulsion, use only H-PU (hydrolysis-resistant).

We recommend: Industrial chemicals

View all

We recommend: Tools

View all