Photo 1

Rod seal RSD 50x65x10

CodeRSD 0500 0650 100 C0
AvailabilityOn request
Rod seal RSD 50x65x10—

Technical data

Properties
Seal typeRSD
Material typePU
Material codeC0
Foreign code2ERSD415
BrandArtic seals
Weight22g
Hydraulic seals dimension
Rod diameter d50mm
Groove Diameter D65mm
Seal width h10mm

Documents

Description

The RSD 50x65x10 U-ring is a product from the renowned manufacturer Artic Seals. Made of polyurethane C0, this double-lip ring is an ideal solution for hydraulic cylinders. Its design provides protection against external contamination, and the additional lip stabilises the seal. Technical data: Working pressure: up to 400 bar Linear speed: up to 0,5 m/s Hardness: 93 Shore A ±2 Material: polyurethane C0 with high abrasion resistance and low compression set Seal size: Inner diameter: 50 mm Outer diameter: 65 mm Thickness: 10 mm The manufacturer code for this product is 2ERSD415. The RSD 50x65x10 U-ring is an excellent solution for those looking for a reliable and durable seal.

Material

PU / TPU / H-PU (polyurethane)

  • Standard PU / TPU-30 °C to +80 °C

Best for high pressure and abrasion, in mineral hydraulic oil. Standard PU must never meet hot water, steam or brake fluid, or run hotter than +90 °C.

Chemical resistance
Can be usedDo not use
Extreme pressure and pulsation (up to 40-50 MPa, very resistant to extrusion into the gap)Hot water and steam with standard PU: hydrolysis, it breaks down into powder
Abrasion, friction, cutting and tearing (4-5 times tougher than NBR)Glycol brake fluid (DOT 3, DOT 4, DOT 5.1): swells quickly
Mineral hydraulic oil (HL, HLP) and greaseHigh temperatures above +90 to +100 °C with standard TPU: it softens
Fuel oil, diesel and technical oils (aliphatic hydrocarbons)Strong (concentrated) acids and alkalis: sulfuric, nitric, caustic soda
Ozone, weather and sunlight (does not crack from weather)Acetone, MEK, toluene, benzene, dichloromethane (polar and aromatic solvents)
Water-based fire-resistant fluids HFA, HFB (only special H-PU)Synthetic ester oils and fire-resistant fluid HFD-R
Dry compressed air and technical gasesStrong alcohols (methanol, ethanol): swelling

Water and heat destroy standard PU: above +50 to +60 °C in water or damp oil it turns into a sticky paste or crumbles. If the system contains water or an emulsion, use only H-PU (hydrolysis-resistant).

We recommend: Industrial chemicals

View all

We recommend: Tools

View all