Photo 1

Wheel hub oil seal 100x135x13/15 RWDR-KASSETTE NBR

Code12017274B
In stock3pcs
Priceexcl. VATFrom €27.00/pcs
Wheel hub oil seal 100x135x13/15 RWDR-KASSETTE NBR—
€27.00excl. VAT

Technical data

Properties
Seal typeRWDR KASSETTE
Material typeNBR
BrandCorteco
Weight142g
Rotary seal dimension
Shaft Diameter100mm
Housing diameter135mm
Width 113mm
Width 215mm

Description

The 100x135x13/15 hub seal of the RWDR-KASSETTE type, made of NBR (nitrile rubber), is a shaft sealing ring intended for use in conditions of heavy dust and mud. Used in the hubs of construction machinery and equipment exposed to intense contamination. A product of the Corteco brand, part of the Freudenberg group. The cassette type effectively retains contamination and grease in the system. The seal does not require additional treatment of the shaft surface. Seal dimensions: • Inner diameter: 100 mm (3.94 inch) • Outer diameter: 135 mm (5.31 inch) • Seal height: 13/15 mm (0.51/0.59 inch) Technical parameters: • Type: RWDR-KASSETTE • Material: NBR • Manufacturer code: 12017274B

Material

NBR (nitrile butadiene rubber)

  • Operating temperature-30 °C to +100 °C

Good with oils, fuels, water and compressed air. Not for brake fluid, solvents, strong acids or sunlight.

Chemical resistance
Can be usedDo not use
Mineral oil, grease and hydraulic oil (H, H-L, H-LP)Brake fluid (DOT 3, DOT 4, DOT 5.1): the ring swells quickly
Diesel, fuel oil, keroseneSunlight and open air (ozone): the rubber cracks
Petrol (gasoline), propane, butaneAcetone, MEK, ethyl acetate and similar solvents
Water and water-based liquids, up to +80 °CBenzene, toluene, trichloroethylene (aromatic and chlorinated solvents)
Compressed air, also with oil mistSynthetic ester oils and fire-resistant fluid HFD-R
Water-based fire-resistant hydraulic fluids (HFA, HFB, HFC)Strong (concentrated) acids, e.g. nitric and sulfuric, and strong oxidizers
Oil-and-water emulsionsSteam and hot water above +100 °C
Weak acids, alkalis and salt solutions, at room temperature
Use with cautionPetrol with a lot of bioethanol (E10, E85): better use FKM (Viton)

Shows low compression set within the recommended temperature range.

We recommend: Industrial chemicals

View all

We recommend: Tools

View all