Photo 1

Rod seal RSD 100x108x6,5 PU

CodeRSD 1000 1080 065 C0
In stock67pcs
Priceexcl. VATFrom PLN 15.91/pcs
Rod seal RSD 100x108x6,5 PU—
PLN 15.91excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeRSD
Material typePU
Material codeC0
Foreign code2ERSD673
BrandArtic seals
Weight9g
Hydraulic seals dimension
Rod diameter d100mm
Groove Diameter D108mm
Seal width h6,5mm

Documents

Description

Rod seal RSD 100x108x6,5 PU is a product from the renowned Italian manufacturer Artic Seals. This is a double-lip ring made of polyurethane C0, intended for use in hydraulic cylinders. Seal size: Inner diameter: 100 mm Outer diameter: 108 mm Thickness: 6,5 mm Manufacturer code: 2ERSD673 Material: Polyurethane (PU) The ring features high abrasion resistance and low compression set. The additional lip stabilises the seal and protects it against external contamination. Technical data: Working pressure: up to 400 bar Linear speed: up to 0,5 m/s Hardness: 93 Shore A ±2 Rod seal RSD 100x108x6,5 PU is an excellent solution for anyone looking for a reliable and durable seal for hydraulic cylinders.

Material

PU / TPU / H-PU (polyurethane)

  • Standard PU / TPU-30 °C to +80 °C

Best for high pressure and abrasion, in mineral hydraulic oil. Standard PU must never meet hot water, steam or brake fluid, or run hotter than +90 °C.

Chemical resistance
Can be usedDo not use
Extreme pressure and pulsation (up to 40-50 MPa, very resistant to extrusion into the gap)Hot water and steam with standard PU: hydrolysis, it breaks down into powder
Abrasion, friction, cutting and tearing (4-5 times tougher than NBR)Glycol brake fluid (DOT 3, DOT 4, DOT 5.1): swells quickly
Mineral hydraulic oil (HL, HLP) and greaseHigh temperatures above +90 to +100 °C with standard TPU: it softens
Fuel oil, diesel and technical oils (aliphatic hydrocarbons)Strong (concentrated) acids and alkalis: sulfuric, nitric, caustic soda
Ozone, weather and sunlight (does not crack from weather)Acetone, MEK, toluene, benzene, dichloromethane (polar and aromatic solvents)
Water-based fire-resistant fluids HFA, HFB (only special H-PU)Synthetic ester oils and fire-resistant fluid HFD-R
Dry compressed air and technical gasesStrong alcohols (methanol, ethanol): swelling

Water and heat destroy standard PU: above +50 to +60 °C in water or damp oil it turns into a sticky paste or crumbles. If the system contains water or an emulsion, use only H-PU (hydrolysis-resistant).

We recommend: Industrial chemicals

View all

We recommend: Tools

View all