Photo 1

Rod seal RSD 42x50x6 PU

CodeRSD 0420 0500 060 C0
In stock119pcs
Priceexcl. VATFrom €2.58/pcs
Rod seal RSD 42x50x6 PU—
€2.58excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeRSD
Material typePU
Material codeC0
Foreign code2ERSD337
BrandArtic seals
Weight4g
Hydraulic seals dimension
Rod diameter d42mm
Groove Diameter D50mm
Seal width h6mm

Documents

Description

Product description: The RSD 42x50x6 PU U-ring is a double-lip sealing ring from the renowned Italian manufacturer Artic Seals. Made of polyurethane C0, it is an ideal solution for hydraulic cylinders. Thanks to its design, the ring not only provides excellent sealing but also protects against external contamination and prevents the stick-slip effect. Technical data: Seal size: 42x50x6 Manufacturer code: 2ERSD337 Material: Polyurethane Working pressure: up to 400 bar Linear speed: up to 0,5 m/s Hardness: 93 Shore A ±2 Material: polyurethane C0 with high abrasion resistance and low compression set The RSD 42x50x6 PU U-ring is a product that will meet the expectations of even the most demanding users.

Material

PU / TPU / H-PU (polyurethane)

  • Standard PU / TPU-30 °C to +80 °C

Best for high pressure and abrasion, in mineral hydraulic oil. Standard PU must never meet hot water, steam or brake fluid, or run hotter than +90 °C.

Chemical resistance
Can be usedDo not use
Extreme pressure and pulsation (up to 40-50 MPa, very resistant to extrusion into the gap)Hot water and steam with standard PU: hydrolysis, it breaks down into powder
Abrasion, friction, cutting and tearing (4-5 times tougher than NBR)Glycol brake fluid (DOT 3, DOT 4, DOT 5.1): swells quickly
Mineral hydraulic oil (HL, HLP) and greaseHigh temperatures above +90 to +100 °C with standard TPU: it softens
Fuel oil, diesel and technical oils (aliphatic hydrocarbons)Strong (concentrated) acids and alkalis: sulfuric, nitric, caustic soda
Ozone, weather and sunlight (does not crack from weather)Acetone, MEK, toluene, benzene, dichloromethane (polar and aromatic solvents)
Water-based fire-resistant fluids HFA, HFB (only special H-PU)Synthetic ester oils and fire-resistant fluid HFD-R
Dry compressed air and technical gasesStrong alcohols (methanol, ethanol): swelling

Water and heat destroy standard PU: above +50 to +60 °C in water or damp oil it turns into a sticky paste or crumbles. If the system contains water or an emulsion, use only H-PU (hydrolysis-resistant).

We recommend: Industrial chemicals

View all

We recommend: Tools

View all