Photo 1

Rod seal RSD 60x68x8 PU

CodeRSD 0600 0680 080 C0
In stock67pcs
Priceexcl. VATFrom €2.96/pcs
Rod seal RSD 60x68x8 PU—
€2.96excl. VAT

Price by quantityexcl. VAT

Available for registered usersSign in or create an account

Technical data

Properties
Seal typeRSD
Material typePU
Material codeC0
Foreign code2ERSD463
BrandArtic seals
Weight7g
Hydraulic seals dimension
Rod diameter d60mm
Groove Diameter D68mm
Seal width h8mm

Documents

Description

We invite you to browse the offer of our online shop, where you will find an RSD-type sealing ring with the designation 2ERSD463. The product comes from the renowned Italian manufacturer Artic Seals. The RSD sealing ring is made of polyurethane C0, a material with high abrasion resistance and low compression set. Thanks to its design, the ring prevents the stick-slip effect and supports the sealing action at low temperatures. Seal size: Inner diameter: 60 mm Outer diameter: 68 mm Thickness: 8 mm Technical data: Working pressure: up to 400 bar Linear speed: up to 0,5 m/s Hardness: 93 Shore A ±2 Material: polyurethane C0 The RSD 60x68x8 PU sealing ring is an ideal solution for hydraulic cylinders. The additional lip stabilises the seal and protects it against external contamination. We invite you to shop in our online shop.

Material

PU / TPU / H-PU (polyurethane)

  • Standard PU / TPU-30 °C to +80 °C

Best for high pressure and abrasion, in mineral hydraulic oil. Standard PU must never meet hot water, steam or brake fluid, or run hotter than +90 °C.

Chemical resistance
Can be usedDo not use
Extreme pressure and pulsation (up to 40-50 MPa, very resistant to extrusion into the gap)Hot water and steam with standard PU: hydrolysis, it breaks down into powder
Abrasion, friction, cutting and tearing (4-5 times tougher than NBR)Glycol brake fluid (DOT 3, DOT 4, DOT 5.1): swells quickly
Mineral hydraulic oil (HL, HLP) and greaseHigh temperatures above +90 to +100 °C with standard TPU: it softens
Fuel oil, diesel and technical oils (aliphatic hydrocarbons)Strong (concentrated) acids and alkalis: sulfuric, nitric, caustic soda
Ozone, weather and sunlight (does not crack from weather)Acetone, MEK, toluene, benzene, dichloromethane (polar and aromatic solvents)
Water-based fire-resistant fluids HFA, HFB (only special H-PU)Synthetic ester oils and fire-resistant fluid HFD-R
Dry compressed air and technical gasesStrong alcohols (methanol, ethanol): swelling

Water and heat destroy standard PU: above +50 to +60 °C in water or damp oil it turns into a sticky paste or crumbles. If the system contains water or an emulsion, use only H-PU (hydrolysis-resistant).

We recommend: Industrial chemicals

View all

We recommend: Tools

View all